White Oak has long been considered one of the preeminent hardwoods of Central & Eastern America. The trees commonly live for hundreds of years, if left undisturbed. The color of the heartwood can vary from a light golden tan to a light to medium brown. The grains are straight. Quartersawn examples often display the “fleck” figuring patterns for which oaks are known. Its renowned toughness and durability has seen White Oak used in boat building for centuries, as it also responds well to steam bending. Despite its large pores and generally coarse surface, the wood works, glues and holds a stain and/or a finish very well.
The White Oak is the most durable of the oak subgroups; however, because of its high shrinkage rates, dimensional stability can be a challenge. Although it is commonly offered in both flatsawn and quartersawn boards, most stable results are always obtained by using quartersawn stock.
Specimens have been documented to reach ages of more 450 years old; while one, still living (in Basking Ridge, NJ), estimated to be over 600 years old.
It should be noted that all Quercus-genus (true oak) hardwoods have been known to discolor when left in contact with iron.
Not listed in the CITES Appendices or on the IUCN Red List of Threatened Species.
Browse all available species online below.
Custom orders are also welcome. See pricelist for indicative pricing.
For a more detailed quote, click and be sure to include as much information as possible (I.e. grade, thickness, length, width, volume etc.)
Durable and relatively affordable, European Chestnut is a popular cladding species in Europe. With looks similar to Oak and Ash, we are sure you will love the appearance of Sweet Chestnut. Grain can be interlocked, but Chestnut is still relatively easy to work. It can split relatively easily, so pre-drilling is essential.
This is a new species for us here at Rare Woods and a first for South Africa. We are delighted with what arrived and can’t wait to get it into some of your projects.
Available in a range of thicknesses and grades, Birch Plywood is a wonderful, high-end board product used in the production of cabinets, furniture and more. With a consistent layer thicknesses, a thick veneer face and all voids patched, Birch Plywood is visually appealing on face grain and end grain, structurally sound and stable in use (indoor application only).
Our Birch Plywood comes from Eastern Europe and we stock both S/BB and BB/BB grades with thicknesses ranging from 6.5mm to 21mm in standard sheet dimensions of 2.45mx1.22m
S/BB: Better face clear – may have occasional patch. Second face is BB grade.
BB/BB: both faces are grade BB. Can be up to 29 patches, a side, but typically 3-6 patches a side.
, , ,
Longhi is an African wood with similar working properties to its more well-known cousin, Anegre. Its color varies from a greyish-white to beige to pinkish-brown color, which slightly darkens with age and UV-ray exposure. Its generally light appearance makes sapwood difficult to distinguish. Its grains are typical straight (though occasionally interlocked) and its texture ranges between fine and medium-fine. It can sometimes possess mottled or subtle tiger-striped figuring.
The wood must be carefully dried, as it is susceptible to fungus. It is considered to be moderately durable, and moderately stable. Longhi has a solid strength-to-weight ratio, which makes it a popular choice for flooring and decking.
, , ,
“Roasting” Flame Birch involves gradually heating the wood up to temperatures of greater than 160 degrees celcius in special heat chambers made of stainless steel under anoxic conditions. The heat removes organic compounds from the wood cells, changing both the physical and chemical make-up of the wood. The process is natural and chemical free. It darkens the wood to a beautiful rich chocolatey brown color whilst still showing the gorgeous grain and figure of the underlying wood.
The thermally modified wood is more dimensionally stable, but the process does reduce bending strength and make the wood a little more brittle. This makes it chip a little easier than the un-modified lumber. The brittleness makes it less suitable for intricate cabinetry, but it is still an excellent choice for less intricate items such as floors, tops, panels, cladding etc.
Extra care needs to be taken when finishing thermally modified wood, as the “bone dry” wood has a tendency to “suck in” much of what is given to it. Our in-house woodworking specialist has had excellent results with Osmo PolyX. He suggests a thicker finish will work better.
This Malaysian species is a medium weight timber suitable for light structural purposes. It is a popular joinery timber and it machines easily and finishes well.
Indigenous to the tropical regions of East Africa and West Africa, as far south as Angola.¬† Anegre has been used primarily as an interior wood; it is decidedly non-durable, and thus not recommended for outdoor applications. The wood’s aesthetics can vary greatly, as Anegre is comprised of three separate species within the Pouteria genus. Its colors can range from pale yellowish to orangish-brown wood, to a pale pinkish-brown, sometimes with additional highlight coloration. Anegre typically darkens to a golden-to reddish brown over time, with repeated UV ray exposure. The heartwood and sapwood of Anegre are usually not distinguishable from each other.
Anegre has a medium texture with closed pores similar to Maple.¬† The species is easy to work with both hand and power tools.
Examples can be quite beautiful — and sometimes stunning, with curly and mottled figuring being not uncommon. Its hues tend to be generally pastel in nature, so it makes a very complimentary, aesthetically unimposing wood for a variety of interior applications. Grains are typically straight but can occasionally be interlocked. Its texture is medium and it has a nice natural luster.
, , , ,